.AixLib.Obsolete.Year2024.Systems.HeatPumpSystems.BaseClasses.PartialHeatPumpSystem

Information

Partial heat pump system. This model is used to enable the use of different heat pump models in the resulting heat pump system.

Characteristics

1. HPSystemController: Model used to calculate a relative compressor speed and heat pump mode based on the ambient temperature and current supply temperature.
2. HeatPump: Any model out of AixLib.Fluid.HeatPumps. Only restrain is the use of the signal bus. One has to first add the sigBus to the existing heat pump model.
3. Movers: Any model out of AixLib.Fluid.Movers to move the used sink or source medium through the heat exchanger.
4. Second heat generator: Any two port interface. This model should represent an auxiliar heater or a boiler in order to simulate a bivalent or hybrid heat pump system.

Contents

Name	Description
Medium_con	Medium at sink side
Medium_eva	Medium at source side
SecHeatGen
TSetToNSet
HeatingCurveFunction

Revisions

• May 22, 2019 by Julian Matthes:
  Rebuild due to the introducion of the thermal machine partial model (see issue #715)
• November 26, 2018  by Fabian Wüllhorst:
  First implementation (see issue #577)