modelFluidAdaptorP
Fluid adaptor, pressure as output
Information
This model is typically used to convert a fluid port to input / output connectors.
Options:
- use_T_in - Determines whether the temperature is an input or output to the adaptor. Typically temperature information should come from the direction of the flow.
- Medium - The working fluid, defaulting to air.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | use_T_in | false | Use temperature from reverse design direction |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | p_in | Prescribed boundary pressure | |
| Modelica.Blocks.Interfaces.RealOutput | m_flow_out | Prescribed mass flow rate | |
| Modelica.Blocks.Interfaces.RealOutput | T_out | Prescribed boundary temperature | |
| Modelica.Fluid.Interfaces.FluidPort_a | port_a | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Blocks.Interfaces.RealInput | T_in | Prescribed boundary temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.Boundary_pT | bou | ||
| Buildings.Fluid.Sensors.MassFlowRate | senMasFlo | ||
| Buildings.Fluid.Sensors.Temperature | senTem |
Contents
| Name | Description |
|---|---|
 Medium |