Step response current source of analog electrical library
The step response current source is built in bondgraphic technology
from a bond graph expSe element, a 1-junction, and three
bonds. A-causal bonds must be used except at the source, because
the causality depends on the embedding of the current source in its
environment.
Parameters:
I: Height of step response source current after infinite time (default value = 1 Amp)
riseTime: Rise time of step response to be generated (default value = 0.5 sec)
riseTimeConst: Rise time constant of step response to be generated (default value = 0.1)
fallTimeConst: Fall time constant of step response to be generated (default value = riseTimeConst)
offset: Offset of step response to be generated (default value = 0 Amp)
startTime: Start time of step response to be generated (default value = 0 sec)
Generated at 2026-04-15T18:18:36Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos
.BondLib.Electrical.Analog.Sources.ExponentialsCurrent