modelDjS

Ebers-Moll junction diode model for bipolar transistors

Extends from Interfaces.TwoPort.

Information

The junction diodic source element is a directed TwoPort. It inherits the effort and flow variables from the directed TwoPort. Junction diodes are a special class of non-linear resistors.

The junction diode model is a simple diode with an exponential characteristic. The diode formula essentially is:

f = Is*(exp(e/Vt) - 1)

However, if the exponent e/Vt reaches either an upper limit EMax or a lower limit Emin, the diode characterisic is linearly continued to avoid overflow or underflow, respectively.

The causality of the junction diode element is free.


Potential variables:

 e1:    Bondgraphic effort variable of inflow

 f1:    Bondgraphic flow variable of inflow, normalized positive for flows into the model

 e2:    Bondgraphic effort variable of outflow

 f2:    Bondgraphic flow variable of outflow, normalized positive for flows out of the model


Parameters:

 Tnom:  Reference temperature (default value = 300.15 K)

 Is:    Transport saturation current (default value = 1e-16 Amp)

 EG:    Energy gap for temperature effect on saturation current (default value = 1.11 Volt)

 N:     Current emission coefficient (default value = 1)

 XTI:   Saturation current temperature exponent (default value = 3)

 EMin:  Minimum exponent (default value = -100)

 EMax:  Maximum exponent (default value = 40)


Equations:

RTemp = e2/Tnom
ISval = IS*exp((RTemp - 1)*EG/Vt + XTI*ln(RTemp))
ExMin = exp(EMin)
ExMax = exp(EMax)
et = e1/(Vt*N)
f1 = ISval*(if et < EMin then ExMin*(et - EMin + 1) - 1 else if et > EMax then ExMax*(et - EMax + 1) - 1 else exp(et) - 1)
f2 = 0

Parameters

TypeNameDefaultDescription
Realk1.3806226e-23Boltzmann's constant
Modelica.SIunits.ElectricChargeq1.6021918e-19Electron charge
Modelica.SIunits.TemperatureTnom300.15Reference temperature
Modelica.SIunits.CurrentIs1e-16Saturation current at reference temperature
Modelica.SIunits.VoltageEG1.11Energy gap for temperature effect on saturation current
RealN1Current emission coefficient
RealXTI3Saturation current temperature exponent
RealEMin-100if x < EMin, the exp(x) function is linearized
RealEMax40if x > EMax, the exp(x) function is linearized

Components

TypeNameDefaultDescription
Modelica.SIunits.VoltageVtThermal voltage
Modelica.SIunits.CurrentISvalSaturation current at device temperature