.DroneLibrary.UsersGuide.References

Information

[Borer2016]

Borer, Nicholas K. et al. (n.d.). “Design and Performance of the NASA SCEPTOR Distributed Electric Propulsion Flight Demonstrator”. In: 16th AIAA Aviation Technology, Integration, and Operations Conference. DOI: 10.2514/6.2016-3920.

[Bresciani2008]

Bresciani, Tommaso (2008-10). “Modelling, Identification and Control of a Quadrotor Helicopter”. MSc Thesis. Lund, Sweden: Department of Automatic Control, Lund University.

[Coïc2022]

Coïc, Clément, Marc Budinger, and Scott Delbecq (2022). “Multirotor drone sizing and trajectory optimization within Modelon Impact”. In: Proc. American Modelica Conference 2022. doi: 10.3384/ECP2118656, pp. 56-63.

[Doo2021]

Doo, Johnny T. et al. (2021). “NASA Electrical Vertical Takeoff and Landing (eVTOL) Aircraft Technology for Public Services - A white Paper. NASA Transformative Vertical FlightWork ing Group 4 (TVF4)”. White Paper NASA Document Number 20205000636. NASA. URL: https://www.sti.nasa.gov/.

[Hellerer2014]

Hellerer, Matthias, Tobias Bellmann, and Florian Schlegel (2014-03). “The DLR Visualization Library - Recent development and applications”. In: Proc. 10th Int. Modelica Conf. doi: 10.3384/ecp14096899, pp. 899-911.

[Kuric2017]

Kuric, Muhamed, Nedim Osmic, and Adnan Tahirovic (2017-07). “Multirotor Aerial Vehicle modeling in Modelica”. In:Proc. 12th Int. Modelica Conf. doi: 10.3384/ecp17132373, pp. 373-380.

[Luukkonen2011]

Luukkonen, Teppo (2011-08). “Modelling and Control of Quadcopter”. Independent research project in applied mathematics. Espoo, Finland: School of Science, Aalto University.

[Ma2016]

Ma, X., Z. Li, and C. Nae (2016). “Multi-domain modeling and Simulation of a Quad-rotor aircraft based on Modelica”. In: Proc. Intl. Conf. Modeling, Simulation and Visualization Methods (MSV), pp. 120-124.

[ModelicaAssociation2014]

Modelica Association (2014-07). “Functional Mock-up Interface for Model Exchange and Co-Simulation Version 2.0”. Tech. rep. Linköping: Modelica Association. URL: https://fmi-standard.org.

[Otter2003]

Otter, Martin, Hilding Elmqvist, and Sven Erik Mattsson (2003-11). “The New Modelica MultiBody Library”. In: Proc. 3rd Int. Modelica Conf. Pp. 311-330.

[Podlaski2020UAV]

Podlaski, et al (2020-10). “UAV Dynamic System Modeling and Visualization using Modelica and FMI”. In: VFS 76th Annu. Forum & Tech. Display. doi: doi : 10 . 4050 / F - 0076 -2020-16289., pp. 1058-1072.

[Podlaski2021Drivetrain]

Podlaski, Meaghan, Robert Niemiec, et al. (2021-05). “Multi-Domain Electric Drivetrain Modeling for UAM-Scale eVTOL Aircraft”. In: Proceedings of the 77th Annual Forum. The Vertical Flight Society. Virtual.

[Podlaski2021VR]

M. Podlaski, et al (2021). “Towards a VR-Based Early Design Interaction for Electric Vertical Take-Off & Landing (eVTOL) Cyber-Physical Models”. In: 2021 NAFEMS World Congr. NAFEMS.

[Podlaski2022Multicopter]

Podlaski, Meaghan, Luigi Vanfretti, et al. (2022). “Extending a Multicopter Analysis Tool using Modelica and FMI for Integrated eVTOL Aerodynamic and Electrical Drivetrain Design”. In: Proc. American Modelica Conference 2022. doi: 10.3384/ECP2118647, pp. 47-55.

[Thiele2017]

Thiele, Bernhard et al. (2017-05). “Towards a Standard-Conform, Platform-Generic and Feature-Rich Modelica Device Drivers Library”. In: Proc. 12th International Modelica Conference. doi: 10.3384/ecp17132713, pp. 713-723.