Model for P/tan(Phi) HVDC link with a PQ diagram and with terminal2
connected to a switched-off bus
This HVDC link regulates the active power flowing through itself
and the reactive power at terminal1. The power factor setpoint is
given as an input and can be modified during the simulation, as
well as the active power setpoint. The terminal2 is connected to a
switched-off bus. The reactive power limits are given by a PQ
diagram.
Generated at 2026-04-15T18:18:36Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos
.Dynawo.Electrical.HVDC.HvdcPTanPhi.HvdcPTanPhiDanglingDiagramPQ