This package contains base classes that are used to construct the models in IDEAS.Fluid.HeatExchangers.
| Name | Description |
|---|---|
| HACoilInside | Calculates the hA value for water inside a coil |
| HADryCoil | Sensible convective heat transfer model for air to water coil |
| HANaturalCylinder | Calculates an hA value for natural convection around a cylinder |
| PartialEffectiveness | Partial model to implement heat exchangers based on effectiveness model |
| PartialEffectivenessNTU | Partial model for heat exchanger with effectiveness - NTU relation and no moisture condensation |
| PartialPrescribedOutlet | Ideal heater, cooler, humidifier or dehumidifier with prescribed outlet conditions |
| WetCoilDryRegime | Fully dry coil model |
| WetCoilDryWetRegime | Model implementing the switching algorithm of the TK-fuzzy model for cooling coil application |
| WetCoilUARated | Model that calculates the UA-value from cooling coil data at rated conditions. |
| WetCoilWetRegime | Fully wet coil model using esilon_C.mo function |
| determineWaterIndex | Determine the index of water in a 2-component medium model |
| dynamicViscosityWater | Returns the dynamic viscosity for water |
| epsilon_C | Computes heat exchanger effectiveness for given capacity flow rates and heat exchanger flow regime |
| epsilon_ntuZ | Computes heat exchanger effectiveness for given number of transfer units and heat exchanger flow regime |
| isobaricExpansionCoefficientWater | Returns the isobaric expansion coefficient for water |
| lmtd | Log-mean temperature difference |
| ntu_epsilonZ | Computes number of transfer units for given heat exchanger effectiveness and heat exchanger flow regime |
| prandtlNumberWater | Returns the Prandtl number for water |
| Examples | Collection of models that illustrate model use and test models |