This record contains thermal and electrical parameters for an uncovered and non-insulated PVT collector (WISC type), based on experimental identification results from Jonas et al. (2018). These parameters were used in the validation of a TRNSYS PVT collector model under ISO 9806:2013 quasi-dynamic conditions.
This record can be used as a generic representation of a WISC-type collector. However, if you know the brand and model of the PVT collector you plan to simulate or install, it is recommended to use the actual datasheet parameters in a custom IDEAS.Fluid.PVTCollectors.Data.GenericQuasiDynamic record.
record UN_Jonas2018 = IDEAS.Fluid.PVTCollectors.Data.GenericQuasiDynamic(final A = 1.66, final CTyp = IDEAS.Fluid.SolarCollectors.Types.HeatCapacity.TotalCapacity, final C = 35800*1.66, final V = 5/1000, final mDry = 20, final mperA_flow_nominal = 0.03, final dp_nominal = 60000, final incAngDat = Modelica.Units.Conversions.from_deg({0, 10, 20, 30, 40, 50, 60, 70, 90}), final incAngModDat = {1, 1, 0.99, 0.98, 0.97, 0.95, 0.92, 0.88, 0.00}, final colTyp = IDEAS.Fluid.PVTCollectors.Types.CollectorType.Uncovered, final IAMDiff = 0.91, final eta0 = 0.436, final c1 = 7.750, final c2 = 0.026, final c3 = 1.640, final c4 = 0.000, final c6 = 0.008, final P_nominal = 280, final gamma = -0.00467, final etaEl = 0.1688);