modelCoil
Coil and magnetic force
Information
Consists of resistance and inductance of the coil, calculating the force acting on the magnet dependent on distance between magnet and coil. This is accomplished by using a translational mechanical connector, therefore the magnet can be connected easily from outside. Additionally, the output signal of the Hall effect sensor is calculated.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| ParameterRecords.DataZeltomStd | data |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | pin_p | ||
| Modelica.Electrical.Analog.Interfaces.NegativePin | pin_n | ||
| Modelica.Blocks.Interfaces.RealOutput | e | Output of Hall effect sensor | |
| Modelica.Mechanics.Translational.Interfaces.Flange_b | flange |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v | pin_p.v - pin_n.v | Voltage across coil |
| SI.Current | i | pin_p.i | Current through coil |
| Modelica.Electrical.Analog.Basic.Resistor | resistor | ||
| Modelica.Electrical.Analog.Basic.Inductor | inductor | ||
| Modelica.Electrical.Analog.Sensors.CurrentSensor | currentSensor | ||
| Modelica.Mechanics.Translational.Sources.Force | force | ||
| Modelica.Mechanics.Translational.Sensors.PositionSensor | positionSensor | ||
| CalcForce | calcForce | ||
| HallSensor | hallSensor |