.Modelica_LinearSystems2.UsersGuide.ReleaseNotes.Version_2_3_2

Version 2.3.2 (April 17, 2015)

Information

This version requires the Modelica 3.2.1 Library. It is is backward compatible to the previous version 2.3.1

All Bode diagrams (in all representation forms) can be optionally plotted as magnitude in dB over angular frequency in rad/s, instead of the default to use magnitude over frequency in Hz.

Modelica_LinearSystems2.StateSpace.Conversion.toZerosAndPoles:
When computing the gain of the ZerosAndPoles object, a better algorithm is used (the previous one could give bad results if there are large zeros or poles with positive Re-values).
Modelica_LinearSystems2.Controllers.Interfaces.PartialSampledBlock,
Modelica_LinearSystems2.Controllers.Interfaces.PartialDiscreteBlock,
Modelica_LinearSystems2.Controllers.Internal.DiscreteStateSpace,
Modelica_LinearSystems2.Controllers.Internal.DiscreteStateSpace2:
Enumeration1/Enumeration2 errors corrected (issued as warning due to stricter checking by Dymola 2015 FD01).
Some Enumeration/Integer errors corrected (issued as warning due to stricter checking by Dymola 2015 FD01).
Some Plot functions have been called without providing record input arguments. This has been fixed by providing a default record in the function definitions.

Several functions had used the input/output attribute in a protected declaration. Due to stricter checking by Dymola 2016, this is reported as warning. These wrong attributes have been removed.
ModelAnalysis.FullAnalysis
If the system is too large (> 50 states, inputs, or outputs), then the system is not printed to the output (previously, the tool "hangs" if printing a too large system).
ModelAnalysis.FullAnalysis
The step response is included as png-file in the html log file systemReport.html.
ModelAnalysis.Poles and ModelAnalysis.Zeros:
Besides plotted, the poles/zeros are also printed to the output window.

Generated at 2026-04-14T18:18:34Z by OpenModelicaOpenModelica 1.26.3 using GenerateDoc.mos