.Modelica_StateGraph2.Examples.BasicStateGraphs

Contents

Name	Description
FirstExample	A first simple Modelica_StateGraph2 example
FirstExample_Variant2	Same as FirstExample, but using an autonomous Parallel step to start the graph and not an initial step
FirstExample_Variant3	Same as FirstExample, but formulating the transition condition of T2 with logical blocks
FirstExample_Variant4	Same as FirstExample_Variant3, but without a delayed transition (by switching the check off)
Sequence	Example to demonstrate a sequence of simple steps
Composite1	Example of a composite step
Composite2	Example of a composite step as submodel
ParallelBranches	Example to demonstrate parallel execution paths
ParallelWithSuspendAndNoResume	Same as example ParallelBranches, but the parallel execution path is suspended and then resumed from the inPort
ParallelInsideDelay	Demonstrates that a delay in one branch of a Parallel is sufficient so that no infinite event looping occurs
ParallelOutsideDelay	Demonstrates that a delay outside of a Parallel is sufficient so that no infinite event looping occurs
ParallelAutonomous	Demonstrates Parallel that runs autonomously
Actions1	Demonstrates MultiSwitch and ShowValue
Actions2	Demonstrates rising and falling edge action blocks
Actions3	Demonstrates usage of TriggeredAdd action block
ParallelWithActions	Demonstrates usage of MultiSwitch block for branches executing in parallel
Utilities	Utility models used in the examples