modelISmpsVport
An extension of SMPS.BasicConverter.ISmps with aditional input pins
that allow setting of the duty cycle ratio (D) via a voltage, e.g.
output of a PID compensator.
Extends from ISmps ( An interface that defines four pins of typical power converters. The models, derived from this interface, do not include a voltage source (should be connected to inP and inN) and a load (should be connected to outP and outN). ).
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| EL.Interfaces.PositivePin | inP (from ISmps) | Positive input pin | |
| EL.Interfaces.NegativePin | inN (from ISmps) | Negative input pin | |
| EL.Interfaces.PositivePin | outP (from ISmps) | Positive output pin | |
| EL.Interfaces.NegativePin | outN (from ISmps) | Negative output pin | |
| EL.Interfaces.PositivePin | vdp | Reference voltage - positive pin |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| EL.InterfacesNegativePin | vdn | Reference voltage - negative pin |