| Modelica.Blocks.Types.ExternalCombiTable2D | tableIDh_p_s (from PropCO2) | Modelica.Blocks.Types.ExternalCombiTable2D(tableName = "Enthalpy", fileName = Modelica.Utilities.Files.loadResource("modelica://SolarTherm/Data/CO2/Props_from_P_S.txt"), table = fill(0.0, 0, 2), smoothness = Modelica.Blocks.Types.Smoothness.LinearSegments) | |
| Modelica.Blocks.Types.ExternalCombiTable2D | tableIDd_p_h (from PropCO2) | Modelica.Blocks.Types.ExternalCombiTable2D(tableName = "Density", fileName = Modelica.Utilities.Files.loadResource("modelica://SolarTherm/Data/CO2/Props_from_P_H.txt"), table = fill(0.0, 0, 2), smoothness = Modelica.Blocks.Types.Smoothness.LinearSegments) | |
| Modelica.Blocks.Types.ExternalCombiTable2D | tableIDT_p_h (from PropCO2) | Modelica.Blocks.Types.ExternalCombiTable2D(tableName = "Temperature", fileName = Modelica.Utilities.Files.loadResource("modelica://SolarTherm/Data/CO2/Props_from_P_H.txt"), table = fill(0.0, 0, 2), smoothness = Modelica.Blocks.Types.Smoothness.LinearSegments) | |
| Modelica.Blocks.Types.ExternalCombiTable2D | tableIDh_p_T (from PropCO2) | Modelica.Blocks.Types.ExternalCombiTable2D(tableName = "Enthalpy", fileName = Modelica.Utilities.Files.loadResource("modelica://SolarTherm/Data/CO2/Props_from_P_T.txt"), table = fill(0.0, 0, 2), smoothness = Modelica.Blocks.Types.Smoothness.LinearSegments) | |
| SI.ThermodynamicTemperature | T_amb | | |
| Boolean | m_sup | | indicates if mass flow from tank is superior enough to calculate |
| SI.MassFlowRate | m_HTF_bis | | mass flow rate used for switching off the PB |
| SI.ThermodynamicTemperature | T_HTF_in | | Inlet temperature of HTF |
| SI.ThermodynamicTemperature | T_HTF_out | | Outlet temperature of HTF |
| SI.ThermodynamicTemperature | TIT_CO2 | | Turbine inlet Temperature of CO2 |
| SI.ThermodynamicTemperature | T_CO2_in_HX | | CO2 temperature at the inlet of the exchanger |
| MedPB.ThermodynamicState | state_CO2_HX | | |
| MedRec.ThermodynamicState | state_HTF_HX | | |
| SI.TemperatureDifference | deltaT_HX | | |
| SI.Power | P_cooling | | Cooling power necessary to cool down the fluid |