.Spot.ACdqo.Sources

Voltage and Power Sources

Information

The sources have optional inputs:

  vPhasor:   voltage {norm, phase}
  omega:     angular frequency
  pv:        {active power, abs(voltage)}  (only PVsource)
  p:         {active power, rective power} (only PQsource)

To use signal inputs, choose parameters vType=signal and/or fType=signal.

General relations between voltage-norms, effective- and peak-values is shown in the table, both relative to each other (pu, norm = 1) and as example (SI, 400 V).

pu V
Three-phase norm |v_abc| 1 400
Single-phase amplitude ampl (v_a), .. sqrt(2/3) 326
Single-phase effective eff (v_a), .. 1/sqrt(3) 230
Phase to phase amplitude ampl (v_b - v_c), .. sqrt(2) 565
Phase to phase effective eff (v_b - v_c), .. 1 400
Three-phase norm |v_dqo| 1 400
Phase to phase dq-norm |vpp_dq| sqrt(2) 565

Contents

Name Description
 Voltage Ideal voltage, 3-phase dqo
 Vspectrum Ideal voltage spectrum, 3-phase dqo
 InfBus Infinite slack bus, 3-phase dqo
 VsourceRX Voltage behind reactance source, 3-phase dqo
 PVsource Power-voltage source, 3-phase dqo
 PQsource Power source, 3-phase dqo
 Partials Partial models
Generated at 2026-04-14T18:18:34Z by OpenModelicaOpenModelica 1.26.3 using GenerateDoc.mos