modelMassFlowBoundary_h
Boundary value component with fixed mass flow rate and enthalpy
Information
Note that it is not necessary to specify if the boundary component is a source or a sink. The enthalpy is only relevant when the component acts as a source, i.e. when the mass flow leaves the component.
However, if you look in the equation section you'll se that the default direction of the mass flow is out of the component.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.FluidPort | port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real | m_flow | Mass flow rate [kg/s] | |
| Real | h | Specific enthalpy (only relevant if fluid leaves this component) [kJ/kg] |