packageOFHC_RRR200
Oxygen-free, high conductivity copper (OFHC) of Residual Resistivity Ratio = 200
Extends from TRANSFORM.Media.Interfaces.Solids.PartialSimpleAlloy_TableBased (Material properties based on tables).
Information
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | mediumName (from PartialAlloy) | "unusablePartialMedium" | Name of the medium |
| String[:] | substanceNames (from PartialAlloy) | {mediumName} | Names of the mixture substances. Set substanceNames={mediumName} if only one substance. |
| Modelica.Media.Interfaces.Types.Temperature | T_reference (from PartialAlloy) | 298.15 | Reference temperature of Medium: default 25 deg Celsius |
| Modelica.Media.Interfaces.Types.SpecificEnthalpy | h_reference (from PartialAlloy) | 0 | Reference enthalpy at T_reference |
| Temperature | T_default (from PartialAlloy) | 293.15 | Default value for temperature of medium (for initialization) |
| SpecificEnthalpy | h_default (from PartialAlloy) | specificEnthalpy_T(T_default) | Default value for specific enthalpy of medium (for initialization) |
| Boolean | use_constantDensity (from PartialAlloy) | false | =true to have density constant at T_density if a temperature dependent function for density exists |
| Temperature | T_density (from PartialAlloy) | T_reference | Reference temperature for constant density calculations |
| Modelica.Units.SI.Temperature | T_min (from PartialSimpleAlloy) | Minimum temperature valid for medium model | |
| Modelica.Units.SI.Temperature | T_max (from PartialSimpleAlloy) | Maximum temperature valid for medium model | |
| SI.MolarMass | MM_const (from PartialSimpleAlloy) | 0.1 | Molar mass |
| Integer | npol (from PartialSimpleAlloy_TableBased) | 2 | Degree of polynomial used for fitting |
| Integer | npolDensity (from PartialSimpleAlloy_TableBased) | npol | Degree of polynomial used for fitting d(T) |
| Integer | npolHeatCapacity (from PartialSimpleAlloy_TableBased) | npol | Degree of polynomial used for fitting cp(T) |
| Integer | npolConductivity (from PartialSimpleAlloy_TableBased) | npol | Degree of polynomial used for fitting lambda(T) |
| Real | tableDensity (from PartialSimpleAlloy_TableBased) | Table for d(T) | |
| Real | tableHeatCapacity (from PartialSimpleAlloy_TableBased) | Table for cp(T) | |
| Real | tableConductivity (from PartialSimpleAlloy_TableBased) | Table for lambda(T) | |
| Real[:] | poly_d (from PartialSimpleAlloy_TableBased) | if size(tableDensity, 1) > 0 then Poly.fitting(tableDensity[:, 1], tableDensity[:, 2], npolDensity) else zeros(npolDensity + 1) | |
| Real[:] | poly_cp (from PartialSimpleAlloy_TableBased) | if size(tableHeatCapacity, 1) > 0 then Poly.fitting(tableHeatCapacity[:, 1], tableHeatCapacity[:, 2], npolHeatCapacity) else zeros(npolHeatCapacity + 1) | |
| Real[:] | poly_lambda (from PartialSimpleAlloy_TableBased) | if size(tableConductivity, 1) > 0 then Poly.fitting(tableConductivity[:, 1], tableConductivity[:, 2], npolConductivity) else zeros(npolConductivity + 1) | |
| Real[:] | x_lambda | tableConductivity[:, 1] | Spline support points |
| Real[size(x_lambda, 1)] | y_lambda | tableConductivity[:, 2] | Spline support values |
| Real[size(x_lambda, 1)] | d_lambda | TRANSFORM.Math.splineDerivatives(x = x_lambda, y = y_lambda, ensureMonotonicity = false) | Spline derivatives at the support points |
| Real[:,2] | tableResistivity | [50, 0.057; 55, 0.076; 60, 0.098; 70, 0.15; 80, 0.22; 90, 0.29; 100, 0.36; 125, 0.54; 150, 0.72; 200, 1.06; 250, 1.39; 300, 1.73; 400, 2.49; 500, 3.19]*[1, 0; 0, 1e-8] | Electrical resistivity table [K, Ohm.m] |
| Real[:] | x_rho | tableResistivity[:, 1] | Spline support points |
| Real[size(x_rho, 1)] | y_rho | tableResistivity[:, 2] | Spline support values |
| Real[size(x_rho, 1)] | d_rho | TRANSFORM.Math.splineDerivatives(x = x_rho, y = y_rho, ensureMonotonicity = true) | Spline derivatives at the support points (data is monotone) |
Contents
| Name | Description |
|---|---|
| Thermal conductivity: cubic spline through the table, held at its end points outside it | |
| linearExpansionCoefficient | Linear expansion coefficient |
| electricalResistivity | Electrical resistivity: cubic spline through the table, held at its end points outside it |