.WasteWater.Icons

Information

This package is part of the WasteWater Library and contains
definitions for the graphical layout of components which are
used within the sub-libraries ASM1, ASM2d and ASM3.

Main Author:
   Gerald Reichl
   Technische Universitaet Ilmenau
   Faculty of Informatics and Automation
   Department Dynamics and Simulation of ecological Systems
   P.O. Box 10 05 65
   98684 Ilmenau
   Germany
   email: gerald.reichl@tu-ilmenau.de


This package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying
disclaimer in the documentation of package Modelica in file "Modelica/package.mo".

Copyright (C) 2003, Gerald Reichl

Contents

Name	Description
deni	Icon for a denitrification tank
nitri	Icon for a nitrification tank
preclar1	Icon for a dynamic preclarifier tank
preclar2	Icon for a static preclarifier tank
precipitation	Icon for a precipitation tank
SecClar	Icon for a secondary clarifier
SecClarKrebs	Icon for a secondary clarifier based on Krebs model
SecClarSimple	Icon for a secondary clarifier based on simple model
blower	Icon for an air blower
pump	Icon for a wastewater pump
FlowSource	Icon for a flow source
WWSource	Icon for a wastewater source
EffluentSink	Icon for a water sink e.g. receiving water
SludgeSink	Icon for a wastewater sink
ControlledDivider2	Icon for a controlled divider into 2 flows
divider2	Icon for a flow divider into 2 flows
mixer2	Icon for a mixer of 2 flows
mixer3	Icon for a mixer of 3 flows
sensor_COD	Icon for a chemical oxygen demand sensor
sensor_NH	Icon for an ammonium nitrogen sensor
sensor_NO	Icon for a nitrate nitrogen sensor
sensor_O2	Icon for an oxygen sensor
sensor_PO	Icon for a phosphate sensor
sensor_Q	Icon for a flow sensor
sensor_TKN	Icon for a Kjeldal nitrogen and total nitrogen sensor
sensor_TP	Icon for a total phosphorus sensor
sensor_TSS	Icon for a total suspended solids sensor