.Buildings.Applications.DataCenters.ChillerCooled.Equipment.Validation.HeatExchanger_ResetController

Information

This example demonstrates how the PID controller in the heat exchanger model can be reset. We compared three options: (1) reset with a paramter value; (2) reset with an input signal; (3) without reset.

Contents

Name	Description
MediumW	Medium model

Revisions

• May 13, 2021, by Michael Wetter:
  Changed boundary condition model to prescribed pressure rather than prescribed mass flow rate. Prescribing the mass flow rate caused unreasonably large pressure drop because the mass flow rate was forced through a closed valve.
  This is for #2488.
• January 28, 2019, by Yangyang Fu:
  First implementation.