.Buildings.Templates.Plants.Controls.StagingRotation.LoadAverage

Information

This block computes the load on a system based on the return temperature, active supply temperature setpoint and measured flow through the associated circuit flow meter, using the following equation.

• For cooling applications: Q_flow = V_flow * rho_default * cp_default * (TSupSet - TRet)
• For cooling applications: Q_flow = V_flow * rho_default * cp_default * (TRet - TSupSet)
• For all applications: Q_flow less than or equal to zero means that there is no actual load on the system.

The output load QReq_flow is the rolling average of Q_flow over a period of dtMea.

Revisions

• May 31, 2024, by Antoine Gautier:
  First implementation.