.Buildings.Templates.Plants.Controls.Utilities.PIDWithEnable

Information

This is an update of Buildings.Controls.OBC.CDL.Reals.PIDWithReset with an additional enable signal provided as a Boolean input.

• When enabled, the output of the controller is identical to Buildings.Controls.OBC.CDL.Reals.PIDWithReset, and the integral term is reset to y_reset at enable time.
• When disabled, the output of the controller is set to y_neutral and the setpoint is overridden by the measurement signal in order to avoid time integration of the control error.

Revisions

• March 29, 2024, by Antoine Gautier:
  First implementation.