.Buildings.UsersGuide.ReleaseNotes.Version_0_11_0 .Buildings.UsersGuide.ReleaseNotes.Version_0_11_0Note: The packages whose name ends with Beta
are still being validated.
Buildings.ThermalZones.Detailed
to compute heat transfer in rooms and through the building
envelope. Multiple instances of these models can be connected to
create a multi-zone building model.Buildings.HeatTransfer.Windows
to compute heat transfer (solar radiation, infrared radiation,
convection and conduction) through glazing systems.Buildings.Fluid.Chillers, added the
chiller models
Buildings.Fluid.Chillers.ElectricReformulatedEIR and
Buildings.Fluid.Cphillers.ElectricEIR, and added the
package Buildings.Fluid.Chillers.Data that contains
data sets of chiller performance data.Buildings.BoundaryConditions with
models to compute boundary conditions, such as solar irradiation
and sky temperature.Buildings.Utilities.IO.WeatherData
with models to read weather data in the TMY3 format.Buildings.Fluid.Sensors.Buildings.Fluid.HeatExchangers.CoolingTowers.Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger
and
Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger,
fixed bug in energy and moisture balance that affected results if a
component adds or removes moisture to the air stream. In the old
implementation, the enthalpy and species outflow at
port_b was multiplied with the mass flow rate at
port_a. The old implementation led to small errors
that were proportional to the amount of moisture change. For
example, if the moisture added by the component was 0.005
kg/kg, then the error was 0.5%. Also, the
results for forward flow and reverse flow differed by this amount.
With the new implementation, the energy and moisture balance is
exact.Buildings.Fluid.Interfaces.ConservationEquation
and in Buildings.Media.Interfaces.PartialSimpleMedium,
set nominal attribute for medium to provide consistent
normalization. Without this change, Dymola 7.4 uses different
values for the nominal attribute based on the value of
Advanced.OutputModelicaCodeWithJacobians=true/false;
in the model Buildings.Examples.HydronicHeating.Buildings.Fluid.Chillers.Carnot.Buildings.Fluid.Movers.BaseClasses.Characteristics.