.Dynawo.Electrical.Controls.WECC.BaseControls

Contents

Name	Description
CurrentLimitsCalculationA	This block calculates the current limits of the WECC REEC-A regulation
CurrentLimitsCalculationB	This block calculates the current limits of the WECC REEC-B regulation
CurrentLimitsCalculationC	This block calculates the current limits of the WECC REEC-C regulation
IqInjectionLogic	Reactive Current Injection Logic
LineDropCompensation	This block calculates the voltage drop in an RcPu, XcPu line knowing the current and the voltage on one side
UdqRef	Calculation of setpoints udSourceRefPu and uqSourceRefPu with source impedance RSourcePu+jXSourcePu based on current setpoints idRefPu and iqRefPu and measured injector voltage udInjPu and uqInjPu
VoltageCheck	This block generates a signal to freeze the control when the voltage is too low or too high
VSourceRef