General
This block generates a boolean PWM output from a real input.
Implementation
Using the MSL , the absolute
value of the continous real input is calculated and then divided
according to the 100 percentage reference value to obtain a number
between 0 and 100.
The pulse is generated with the modified block BooleanPulse
.
Notes
- The pulse uses the absolute value of the real signal
input.
- The width of the pulse only goes from 0 to 100 percent. If the
input value is greater than 100 the PWM takes 100 as width.
- The user can change the frecuency of PWM and the start
time.
- The block needs a reference value for 100 percent.
Example
Controller
Generated at 2026-04-14T18:18:34Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos
.Servomechanisms.Electrical.IdealPWM