.Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab

Information

This is a model of a single flow circuit of a radiant slab with pipes or a capillary heat exchanger embedded in the construction. For a model with multiple parallel flow circuits, see Buildings.Fluid.HeatExchangers.RadiantSlabs.ParallelCircuitsSlab.

See the user's guide for more information.

Revisions

• October 18, 2017, by Michael Wetter:
  Removed state at surface b of con_b. As this surface is connected to surface a of con_a, which already has a state, the state can be removed, rather than relying on the symbolic processor to remove one of these two states that are directly coupled. This is indeed required to avoid a warning about overdetermined initial equations.
• January 06, 2016, by Thierry S. Nouidui:
  Renamed parameter nSta2 to nSta.
• November 17, 2016, by Thierry S. Nouidui:
  Added parameter nSta2 to avoid translation error in Dymola 2107. This is a work-around for a bug in Dymola which will be addressed in future releases.
• February 5, 2015, by Michael Wetter:
  Renamed res to preDro for #292.
• September 12, 2014, by Michael Wetter:
  Set start value for hPip(fluid(T)) to avoid a warning about conflicting start values in Dymola 2015 FD01.
• February 27, 2013, by Michael Wetter:
  Fixed bug in the assignment of the fictitious thermal resistance by replacing RFic[nSeg](each G=A/Rx) with RFic[nSeg](each G=A/nSeg/Rx).
• April 5, 2012, by Michael Wetter:
  Revised implementation.
• April 3, 2012, by Xiufeng Pang:
  First implementation.